- Messages
- 7,936
- Joined
- Sep 9, 2014
- Reaction score
- 7,766
- Points
- 628
Must be an OMB issue, try with the password for the image you have in flash.installed on OMB VU UNO acces denied with pass and without pass filezila/dcc/wincsp
Must be an OMB issue, try with the password for the image you have in flash.installed on OMB VU UNO acces denied with pass and without pass filezila/dcc/wincsp
Try a different ftp client (filezilla) on port 21.in flash my image is open blackhole 4.3 and my pass is dreambox but not accepted on openten
All softcams in the feeds have been tested, possible error in your config?well after a long long night this is working but no cams will work for me so i am back to the origional image with nothing added no cams loaded from a full reset.. can someone explain what i need to do i have allowed it to update what it wanted to update. i have done the service scan of 30w.. up to now all good.. from here what should i do?? i have tried downloading oscam from green green and nothing i also tried CCcam and nothing so after i tried a new fresh boot this time using Levis multi downloaded keys etc tried it with oscam emu and cccam nothing so i am obviously missing something here ...!!! WHAT?
sorry i dont understand this i can us filezilla all ok thanks with out problem..Try a different ftp client (filezilla) on port 21.
That reply was for another user.sorry i dont understand this i can us filezilla all ok thanks with out problem..
Thats not an error there is no pid only because the cam has not run yet, the file installed ok.i have now downloaded oscam emu the one you show in picture and i get this message is this a problem as i cant open a file or directory??
This image has only been built for vu+ receivers sorry.Hello ..Is posible download Your soft to Zgemma H7.S 4k??..because Your soft is the best to vu uno 4kse
still wont run or clear anything at allThats not an error there is no pid only because the cam has not run yet, the file installed ok.
Are you saying the cam does not start?still wont run or clear anything at all
Never had this problems, which box do you have?No remote control buttons working in test screens so unable to adjust brightness, saturation etc. User interface shows dreambox remote, I'm pretty sure openvix shows VU+ remote don't know if the problems are related. Any fix?
All running good on 30w Ten thanks for the help.. ApriciatedAre you saying the cam does not start?
I also own a solo2 where its working 100%.
Thread starter | Similar threads | Forum | Replies | Date |
---|---|---|---|---|
Open Ten OpenTen - Compatible Skins | Open Ten | 0 | ||
Beta Testing Open Ten Zeus Build #4 - Neoboot Edition 16/05/20 | Open Ten | 72 |
Must be an OMB issue, try with the password for the image you have in flash.installed on OMB VU UNO acces denied with pass and without pass filezila/dcc/wincsp
Try a different ftp client (filezilla) on port 21.in flash my image is open blackhole 4.3 and my pass is dreambox but not accepted on openten
All softcams in the feeds have been tested, possible error in your config?well after a long long night this is working but no cams will work for me so i am back to the origional image with nothing added no cams loaded from a full reset.. can someone explain what i need to do i have allowed it to update what it wanted to update. i have done the service scan of 30w.. up to now all good.. from here what should i do?? i have tried downloading oscam from green green and nothing i also tried CCcam and nothing so after i tried a new fresh boot this time using Levis multi downloaded keys etc tried it with oscam emu and cccam nothing so i am obviously missing something here ...!!! WHAT?
sorry i dont understand this i can us filezilla all ok thanks with out problem..Try a different ftp client (filezilla) on port 21.
That reply was for another user.sorry i dont understand this i can us filezilla all ok thanks with out problem..
Thats not an error there is no pid only because the cam has not run yet, the file installed ok.i have now downloaded oscam emu the one you show in picture and i get this message is this a problem as i cant open a file or directory??
This image has only been built for vu+ receivers sorry.Hello ..Is posible download Your soft to Zgemma H7.S 4k??..because Your soft is the best to vu uno 4kse
still wont run or clear anything at allThats not an error there is no pid only because the cam has not run yet, the file installed ok.
Are you saying the cam does not start?still wont run or clear anything at all
Never had this problems, which box do you have?No remote control buttons working in test screens so unable to adjust brightness, saturation etc. User interface shows dreambox remote, I'm pretty sure openvix shows VU+ remote don't know if the problems are related. Any fix?
All running good on 30w Ten thanks for the help.. ApriciatedAre you saying the cam does not start?
I also own a solo2 where its working 100%.
Thread starter | Similar threads | Forum | Replies | Date |
---|---|---|---|---|
Open Ten OpenTen - Compatible Skins | Open Ten | 0 | ||
Beta Testing Open Ten Zeus Build #4 - Neoboot Edition 16/05/20 | Open Ten | 72 |