VUPLUS Team VU+ Image Discussion Firm vuplus-imagen

[paztero1]

Le e puesto a mi deco vusolose en el openmultiboot esta imagen concretamente la del 20150723 osea la ultima, loa e configurado y e puesto algunos plugins, para poder instalar cccam e istalado el plugin devil 4.0 y me e descargado la version de can de la BH 2.3.0 y desde el mismo plugin la e iniciado teniendo puesto mi archivo de cccam.conf pero no hay forma posible de hacerle andar.
Alguien me puede orientar un poco de esta imagen y que emus son las que son compatibles y funcionan en este firm, estoy como digo es pruebas para ver el funcionamiento de das diferentes imagenes.
Gracias.

 

[Ten Below]

Him and put my deco vusolose in this picture openmultiboot Specifically last bone of 20150723, loa And Set ye me put some plugins to install cccam and istalado 4.0 plugin devil and me and downloaded the version of can of BH from 2.3 and 0.0 the same plugin and started on my file Having cccam.conf but there is no way to make him walk.
Anyone can guide me a little of this and that emus are Those That are consistent and work in esta firm, I like saying is running tests to see different images of days.
Thanks.

You can start it manually from telnet or i have used this on an original vuplus backup in the past which should still work.

 

[paztero1]

I want to say that installing this file you indicate in tmp me, it works.

 

[paztero1]

Bueno and Puesto el archivo that has me puesto en en / tmp y luego con el plugin dreamexplorer it and located it and installed y pero follow the same pluck me cccam y no puedo viewing.
That command must be put into telnet to select the file in question.

 

[Ten Below]

Good and Since the That file have me put in / tmp and then the plugin dreamexplorer it and located it and installed and but follow the same pluck me cccam and not I can viewing.
That command must be put into telnet to select the file in question.

Where have you placed the CCcam binary file?

 

[paztero1]

My configuration file, cccam, conf is in / etc and also put it in usr / keys, but in any case it works.

I just see ddc in the / usr / camscript there is a file called ncam_cccam2.3.0

any ideas for solving this problem, I think it is something which will route cccam.conf

Now appears on the menu I softcam manager but when I go to download error tells me my internet line works perfectam intermet entity.

 

[Ten Below]

To start by telnet it should be
path to cam bin/cambin-name &
e.g
/usr/bin/CCcam_230 &

Make sure the cam bin is executable (chmod 755)

 

[paztero1]

Good and taken away all he had installed e reinstalled cccam cccam 2.3.3, I have installed on the route and attribute /usr/bin/cccam2.3.0 755 and also put on that route cccam file, Conf 755 and the atriburo not work for me.
And also seen in the / usr / camscript there ncam_2.3.0 755 file attribute, to do something there.
This is already a challenge to run this with cccam and took more than three days with her.

 

[Ten Below]

Decided to load the image myself in openmultiboot & have a look, you are right the older softcam manager no longer works however i found an open source one for sh4 receivers & was easily able to edit the code to work on my solo2.
I will upload here for you later this evening now is time for

 

[paztero1]

I'm really grateful, greetings.

 

[paztero1]

Well I put again the clean image only has the plugins me as indicated and everything is perfect that is the cccam are n mounted in the / usr / emu / and attributes 755 and the usr / keys / route this file mio attribute settings cccam.conf with 644 and so and made 755, and set the plugin and cccam and since this enusr / emu and that the configuration is in / usr / keys and enabled the no way possible seeing nothing but fat.
As commented the image is quite clean single channel list and image plugins tien as he that made me.

 

[Ten Below]

Well I put again the clean image only has the plugins me as indicated and everything is perfect that is the cccam are n mounted in the / usr / emu / and attributes 755 and the usr / keys / route this file mio attribute settings cccam.conf with 644 and so and made 755, and set the plugin and cccam and since this enusr / emu and that the configuration is in / usr / keys and enabled the no way possible seeing nothing but fat.
As commented the image is quite clean single channel list and image plugins tien as he that made me.

Its looking for the cfg in the default /var/etc/ location, just tried to run CCcam myself & had to create a symlink to get it reading the config.
I will build another ipk tomorrow crigriga, sorry the last did not do what you were looking for.

 

[paztero1]

I am grateful for the interest you have for me and have if we run this, it's stubbornness but when I start something I like to finish my little knowledge of this.
We said thank you for your interest in this topic, greetings.

 

[Ten Below]

This should fix it for you cribriga, please extract & ftp the attached Softcam.pyo file to /usr/lib/enigma2/python/Plugins/Extensions/AlternativeSoftCamManager (or multiboot location if this is what you are using)
Overwrite the original then restart E2, tested on a fresh multiboot installation & openhdf 5.2 in flash.
Let us know please.

 

[paztero1]

If I can not right now, but do not worry inform.
I have to flash the open BH 0.1 and the openmultiboot have official VUPLUS image.

 

[Ten Below]

If I can not right now, but do not worry inform.
I have to flash the open BH 0.1 and the openmultiboot have official VUPLUS image.

No problem here is an ipk file to try on your fresh installation in that case.

 

[paztero1]

My words are full appreciation for his work and his intelligence on these issues.
Well ye followed suit and replaced the file SOFTCAM.PYO which have left me in the corresponding route and restart the deco and total light, joy that I finally have the original firm working with cccam.
Naturally give thanks again you are one of a kind, greetings.
And forgive my writing as to pass by translators then the words are not right.

 

[paztero1]

Note that if you get off the BZsat plugins to let you get off a few things working cccam, and whether it had to delete because ye devil 5.0 and all working well.

 

[José Rodríguez]

Hola cribiga , yo también logré hacer funcionar mi vu+ duo2 con la imagen oficial pero no tengo manera de hacer funcionar el epg ¿¡Tú lo has conseguido? un saludo

 

[Ten Below]

cribiga Hello, I also managed to run my vu + DUO2 with the official image but I have no way to run the epg?! You've got what? a greeting

You can install crossepg from system plugins, the epg display must also be configured to display bouquets ect before it will behave like a regular release image.

 

[paztero1]

Le e puesto a mi deco vusolose en el openmultiboot esta imagen concretamente la del 20150723 osea la ultima, loa e configurado y e puesto algunos plugins, para poder instalar cccam e istalado el plugin devil 4.0 y me e descargado la version de can de la BH 2.3.0 y desde el mismo plugin la e iniciado teniendo puesto mi archivo de cccam.conf pero no hay forma posible de hacerle andar.
Alguien me puede orientar un poco de esta imagen y que emus son las que son compatibles y funcionan en este firm, estoy como digo es pruebas para ver el funcionamiento de das diferentes imagenes.
Gracias.

 

[Ten Below]

Him and put my deco vusolose in this picture openmultiboot Specifically last bone of 20150723, loa And Set ye me put some plugins to install cccam and istalado 4.0 plugin devil and me and downloaded the version of can of BH from 2.3 and 0.0 the same plugin and started on my file Having cccam.conf but there is no way to make him walk.
Anyone can guide me a little of this and that emus are Those That are consistent and work in esta firm, I like saying is running tests to see different images of days.
Thanks.

You can start it manually from telnet or i have used this on an original vuplus backup in the past which should still work.

 

[paztero1]

I want to say that installing this file you indicate in tmp me, it works.

 

[paztero1]

Bueno and Puesto el archivo that has me puesto en en / tmp y luego con el plugin dreamexplorer it and located it and installed y pero follow the same pluck me cccam y no puedo viewing.
That command must be put into telnet to select the file in question.

 

[Ten Below]

Good and Since the That file have me put in / tmp and then the plugin dreamexplorer it and located it and installed and but follow the same pluck me cccam and not I can viewing.
That command must be put into telnet to select the file in question.

Where have you placed the CCcam binary file?

 

[paztero1]

My configuration file, cccam, conf is in / etc and also put it in usr / keys, but in any case it works.

I just see ddc in the / usr / camscript there is a file called ncam_cccam2.3.0

any ideas for solving this problem, I think it is something which will route cccam.conf

Now appears on the menu I softcam manager but when I go to download error tells me my internet line works perfectam intermet entity.

 

[Ten Below]

To start by telnet it should be
path to cam bin/cambin-name &
e.g
/usr/bin/CCcam_230 &

Make sure the cam bin is executable (chmod 755)

 

[paztero1]

Good and taken away all he had installed e reinstalled cccam cccam 2.3.3, I have installed on the route and attribute /usr/bin/cccam2.3.0 755 and also put on that route cccam file, Conf 755 and the atriburo not work for me.
And also seen in the / usr / camscript there ncam_2.3.0 755 file attribute, to do something there.
This is already a challenge to run this with cccam and took more than three days with her.

 

[Ten Below]

Decided to load the image myself in openmultiboot & have a look, you are right the older softcam manager no longer works however i found an open source one for sh4 receivers & was easily able to edit the code to work on my solo2.
I will upload here for you later this evening now is time for

 

[paztero1]

I'm really grateful, greetings.

 

[paztero1]

Well I put again the clean image only has the plugins me as indicated and everything is perfect that is the cccam are n mounted in the / usr / emu / and attributes 755 and the usr / keys / route this file mio attribute settings cccam.conf with 644 and so and made 755, and set the plugin and cccam and since this enusr / emu and that the configuration is in / usr / keys and enabled the no way possible seeing nothing but fat.
As commented the image is quite clean single channel list and image plugins tien as he that made me.

 

[Ten Below]

Well I put again the clean image only has the plugins me as indicated and everything is perfect that is the cccam are n mounted in the / usr / emu / and attributes 755 and the usr / keys / route this file mio attribute settings cccam.conf with 644 and so and made 755, and set the plugin and cccam and since this enusr / emu and that the configuration is in / usr / keys and enabled the no way possible seeing nothing but fat.
As commented the image is quite clean single channel list and image plugins tien as he that made me.

Its looking for the cfg in the default /var/etc/ location, just tried to run CCcam myself & had to create a symlink to get it reading the config.
I will build another ipk tomorrow crigriga, sorry the last did not do what you were looking for.

 

[paztero1]

I am grateful for the interest you have for me and have if we run this, it's stubbornness but when I start something I like to finish my little knowledge of this.
We said thank you for your interest in this topic, greetings.

 

[Ten Below]

This should fix it for you cribriga, please extract & ftp the attached Softcam.pyo file to /usr/lib/enigma2/python/Plugins/Extensions/AlternativeSoftCamManager (or multiboot location if this is what you are using)
Overwrite the original then restart E2, tested on a fresh multiboot installation & openhdf 5.2 in flash.
Let us know please.

 

[paztero1]

If I can not right now, but do not worry inform.
I have to flash the open BH 0.1 and the openmultiboot have official VUPLUS image.

 

[Ten Below]

If I can not right now, but do not worry inform.
I have to flash the open BH 0.1 and the openmultiboot have official VUPLUS image.

No problem here is an ipk file to try on your fresh installation in that case.

 

[paztero1]

My words are full appreciation for his work and his intelligence on these issues.
Well ye followed suit and replaced the file SOFTCAM.PYO which have left me in the corresponding route and restart the deco and total light, joy that I finally have the original firm working with cccam.
Naturally give thanks again you are one of a kind, greetings.
And forgive my writing as to pass by translators then the words are not right.

 

[paztero1]

Note that if you get off the BZsat plugins to let you get off a few things working cccam, and whether it had to delete because ye devil 5.0 and all working well.

 

[José Rodríguez]

Hola cribiga , yo también logré hacer funcionar mi vu+ duo2 con la imagen oficial pero no tengo manera de hacer funcionar el epg ¿¡Tú lo has conseguido? un saludo

 

[Ten Below]

cribiga Hello, I also managed to run my vu + DUO2 with the official image but I have no way to run the epg?! You've got what? a greeting

You can install crossepg from system plugins, the epg display must also be configured to display bouquets ect before it will behave like a regular release image.